Kirjeldus

RETROSOUND “MOTOR-2DAB” DAB + complete set in “Grand Prix” design with lots of accessories

The “Model MOTOR-2DAB” is a premium model from RetroSound. It is visually identical to the cheaper “MOTOR-1DAB” model and, in addition to its equipment, has a USB input on the back of the device, Bluetooth functions, pre-amplifier outputs and multi-color lighting.

EQUIPMENT
– DAB + digital radio
– FM radio with RDS functions
– A2DP Bluetooth audio playback for wireless smartphone integration
– USB input on the back of the device
– AUX input (3rd

– RETROSOUND MOTOR-2DAB radio module with DAB + and FM
– RETROSOUND FACE-GRANDPRIX display unit
– RETROSOUND RSP-296 ISO installation kit for DIN slot
– AMPIRE DAB1 antenna
splitter – AMPIRE XUB060 USB built-in socket with 60cm cable
USB4G
– H-MARK confirmation from TÜV Süd

ANTENNA CONNECTION
Most classic vehicles have passive rod or telescopic antennas installed. These are also suitable for DAB + radio reception. The set includes a DAB1 antenna splitter. With window antennas or electronically reinforced roof antennas, you have to install a separate DAB + antenna and cannot use the DAB1.

H MARK
Any concerns that your H license plate might be in danger through the installation of a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the RetroSound Model Zuma “and the RetroSound Model Two” including the vehicle-specific panel and control buttons may be installed in oldtimers with an H mark or do not prevent the award of the H mark!

EQUIPMENT
– Playback of MP3 and WMA files via the rear USB input
– Bluetooth hands-free system with A2DP audio streaming
– Adjustable LCD lighting with 32,000 different colors
– DAB + / FM / MW radio receiver with RDS and 30 station memory
– Tuner with European even and odd radio frequencies
– Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
– 2 stereo cinch outputs for external amplifiers (front / rear)
– 3 equalizer programs plus individual bass / treble / fader / balance adjustment
– XBAS Loudness
– non-volatile memory

EXPANSION POSSIBILITIES
– USB input (rear) up to 32GB.
– AUX input (stereo)
– 2 RCA outputs (stereo) for external amplifiers (front / rear)
– Separate turn-on for power antenna and Amplifier

TECHNICAL DATA RADIO PART
– VHF European broadcasting frequency range 87.5-107.9 MHz. (0.05 MHz. In steps)
– MW frequency range 530-1710 kHz (9 kHz. In steps)
– DAB + reception via SMB antenna

input for passive DAB + antennas GENERAL DATA
– Dimensions of basic radio device 101x51x136mm
– Power supply 10.5 to 14.4 volts
– Maximum current consumption 15 amperes
– Quiescent current 3.5 mA
– Output power 12V, 4 ohms, <1% THD: 4×15 watts sinus
– Impedance loudspeaker 4-8 ohms
– Cinch outputs 6 channel 2.85 volts for external amplifiers (front / rear)
– input sensitivity AUX1> 300 mV / 6 kOhm
– input sensitivity AUX2> 300 mV / 6 kOhm