Kirjeldus

GLADEN MOSCONI PICO V2 4|8 DSP – 4-Channel + 8-Channel DSP

• 4-channel amplifier

• Class D technology

• Integrated 8-channel DSP

• Up to 460 watts total output

• Generation 2024

Overview MOSCONI Pico V2 4|8 DSP

With the PICO V2 4|8 DSP, MOSCONI launches the second generation of PICO 4-channel DSP amplifiers for the car audio market. In addition to improved connectivity, the new PICO delivers enhanced sound performance and higher efficiency.

All connections are now located on one side, and under a magnetic housing cover, all relevant adjustment switches needed for operation in modern vehicles are found. All inputs now support both high and low level signals. DSP settings can be fully configured via a USB-C port.

Perfect OEM Integration:

A powerful DSP amplifier optimized for factory radio integration. Eight analog inputs up to 30 V, flexible routing, 3 x input EQ, and delay.

With 4 x 90 watts, the PICO V2 4|8 DSP is ideal for active and semi-active systems, as well as classic front + rear applications.

With two digital inputs (SP-DIF and BT+) and four processed line-outs, it is prepared for all future configurations.

Input Section:

• 8 x switchable analog inputs (High-Level / Low-Level), Class SB compatible, 2–30 V

• 1 x digital input SP-DIF optical (8 kHz – 96 kHz sampling rate)

• 1 x digital input coaxial (8 kHz – 96 kHz sampling rate)

• 1 x Bluetooth port with SP-DIF TTL (8 kHz – 96 kHz, e.g., for Mos_BTS Bluetooth streaming module)

• Bluetooth extended digital audio port (BT+) – flexible 8 kHz – 384 kHz synchronous digital input for 2–16 channels, direct DSP access without jitter (e.g., MOS BTS-LD4C BT streaming module or extended analog inputs)

DSP Section:

• 912 MHz, 32-bit audio processor with 64-bit core

• Double-precision 56-bit filter calculations

• Sample rate: 96 kHz

Control:

• 1 x Remote Connector (analog, for RTC.2 remote volume control)

• 1 x BT+ control port (MOS-BT3.0 app control, RC-CAN bus control, MOS_USB2.0 programming dongle, BTS-LD4C high-res streaming module, Gladiator controller)

• Pilot tone control capable

• 1 x Remote Out, 1 x Remote In, Auto-Remote at high-level connection

• MOLEX® speaker connectors

• Very compact design with low heat dissipation, ideal for installation behind panels

Software Features:

• 3 x 9-band parametric input EQ (de-equalizing), dynamic

• 6 x input delay 0–3 ms / 0.01 ms (de-delay)

• 10 x digital input level controls (signal conditioning)

• Flexible mixer for signal routing (channel-separated, can sum and subtract, 10 inputs to 4 x 2 output groups)

• 6 x 30-band or 4 x 30-band + 2 x 15-band group EQ (parametric, relative phase stable)

• 8 x 10-band output filters (High Pass / Low Pass / High Shelf / Low Shelf / Notch / Allpass 1st–4th order / Speaker EQ)

• 8(10) x speaker delay 0–12 ms, 0.01 ms

• 8 x speaker phase switch

• Flexible phase control with calculation tool

• Extensive analysis tools integrated

• B.A.R.N.I.E. compatible

Technical Data Mosconi Pico V2 4|8 DSP

Output Power / Output Section:

• 4 Ohms: 4 x 90 W (Channels 1+2 | 5+6), 2-ohm stable

• 4 Ohms: 2 x 85 W (Channels 1–2) + 230 W bridged (Channels 5+6)

• 4 Ohms: 2 x 230 W bridged (Channels 1+2 | 5+6)

• Line Out: 4 x 2 Vrms

• Output channels 3+4: pure bypass of inputs 3+4

Data:

• Input voltage: 2 Vrms (LL) – 15 Vrms (HL default) – 30 Vrms (HL max)

• Overall efficiency: > 80%

• Auto-On (high-level only): Off-BTL

• Dimensions: 150 x 160 x 46 mm

• Weight: 1150 g