Gladen MOSCONI ATOMO 4

339.00

Kirjeldus

ATOMO 4 – Maximum performance in the smallest of spaces

  • Extremely compact, powerful 4-channel amplifier
  • Wide input voltage range 0.4 Vrms – 5 Vrms (low level) / 1.6 Vrms – 20 Vrms (high level)
  • Inputs flexibly configurable (floating / fixed ground, switchable load resistors)
  • Remote detection (BTL)
  • High pass / low pass filter. Inputs designed in Molex industry standard (Micro-Fit)

Technical Data Mosconi Atomo 4

POWER SUPPLY:

  • Power supply voltage: 10 – 16 V
  • DC-DC converter typology: Unregulated – Push Pull
  • External fuse: 1 x 20 A
  • Power-on / Power-off voltage threshold: 9 V / 6 V
  • Mute delay time: 3 secs
  • Autosense power-on (HL only) BTL source only
  • Overall efficiency: > 75 %
  • Standby current: < 0.1 mA (typical)
  • Idle current: 0.58 A @ 14.4 V
  • Thermal cutoff threshold: 93 °C (± 5 %)

OUTPUT POWER RMS @ 14.4 V (1 % THD)

  • Output power RMS @ 4 Ω: 60 W x 4 or 150 W x 2 [BTL]
  • Output power RMS @ 2 Ω: 75 W x 4
  • T.H.D. @ 4 Ohm: < 0.2 % (1 kHZ / 90 Power rating ref)
  • T.H.D. @ 2 Ohm: < 0.6 % (1 kHZ / 90 Power rating ref)
  • Minimum load: 2 Ohm with musical signal

SIGNAL INPUT

  • Low level input sensitivity range: 0.3 ÷ 5 Vrms
  • High level input sensitivity range: 1.2 ÷ 20 Vrms
  • Bandwidth (- 3 dB ÷ 10 W): 5 Hz ÷ 31 kHz
  • Low level Input impedance: > 15 kOhm
  • High level input impedance: 21 Ohm (dummy load with jumper)
  • Ground reference (LL only): OPEN – 21 Ohm
  • S/N (AP filter 10 Hz – 22 kHz):

FEATURES

  • Onboard filter configuration: OFF – HP – LP
  • Onboard filter slope: 12 dB/Oct
  • Onboard filter frequency: 80 Hz
  • Autosense power-on (HL only): BTL source only
  • Start&Stop compliance: YES

CONNECTIONS

  • Low/High level input : Micro-Fit
  • Speaker out: Mini-Fit
  • Power supply: Mini-Fit

APPEARANCE

  • Dimensions: 109 x 65 x 34 mm
  • Weight: 320 g

Gladen MOSCONI ATOMO 4

339.00

Kirjeldus

ATOMO 4 – Maximum performance in the smallest of spaces

  • Extremely compact, powerful 4-channel amplifier
  • Wide input voltage range 0.4 Vrms – 5 Vrms (low level) / 1.6 Vrms – 20 Vrms (high level)
  • Inputs flexibly configurable (floating / fixed ground, switchable load resistors)
  • Remote detection (BTL)
  • High pass / low pass filter. Inputs designed in Molex industry standard (Micro-Fit)

Technical Data Mosconi Atomo 4

POWER SUPPLY:

  • Power supply voltage: 10 – 16 V
  • DC-DC converter typology: Unregulated – Push Pull
  • External fuse: 1 x 20 A
  • Power-on / Power-off voltage threshold: 9 V / 6 V
  • Mute delay time: 3 secs
  • Autosense power-on (HL only) BTL source only
  • Overall efficiency: > 75 %
  • Standby current: < 0.1 mA (typical)
  • Idle current: 0.58 A @ 14.4 V
  • Thermal cutoff threshold: 93 °C (± 5 %)

OUTPUT POWER RMS @ 14.4 V (1 % THD)

  • Output power RMS @ 4 Ω: 60 W x 4 or 150 W x 2 [BTL]
  • Output power RMS @ 2 Ω: 75 W x 4
  • T.H.D. @ 4 Ohm: < 0.2 % (1 kHZ / 90 Power rating ref)
  • T.H.D. @ 2 Ohm: < 0.6 % (1 kHZ / 90 Power rating ref)
  • Minimum load: 2 Ohm with musical signal

SIGNAL INPUT

  • Low level input sensitivity range: 0.3 ÷ 5 Vrms
  • High level input sensitivity range: 1.2 ÷ 20 Vrms
  • Bandwidth (- 3 dB ÷ 10 W): 5 Hz ÷ 31 kHz
  • Low level Input impedance: > 15 kOhm
  • High level input impedance: 21 Ohm (dummy load with jumper)
  • Ground reference (LL only): OPEN – 21 Ohm
  • S/N (AP filter 10 Hz – 22 kHz):

FEATURES

  • Onboard filter configuration: OFF – HP – LP
  • Onboard filter slope: 12 dB/Oct
  • Onboard filter frequency: 80 Hz
  • Autosense power-on (HL only): BTL source only
  • Start&Stop compliance: YES

CONNECTIONS

  • Low/High level input : Micro-Fit
  • Speaker out: Mini-Fit
  • Power supply: Mini-Fit

APPEARANCE

  • Dimensions: 109 x 65 x 34 mm
  • Weight: 320 g

Gladen MOSCONI ATOMO 4

339.00

Kirjeldus

ATOMO 4 – Maximum performance in the smallest of spaces

  • Extremely compact, powerful 4-channel amplifier
  • Wide input voltage range 0.4 Vrms – 5 Vrms (low level) / 1.6 Vrms – 20 Vrms (high level)
  • Inputs flexibly configurable (floating / fixed ground, switchable load resistors)
  • Remote detection (BTL)
  • High pass / low pass filter. Inputs designed in Molex industry standard (Micro-Fit)

Technical Data Mosconi Atomo 4

POWER SUPPLY:

  • Power supply voltage: 10 – 16 V
  • DC-DC converter typology: Unregulated – Push Pull
  • External fuse: 1 x 20 A
  • Power-on / Power-off voltage threshold: 9 V / 6 V
  • Mute delay time: 3 secs
  • Autosense power-on (HL only) BTL source only
  • Overall efficiency: > 75 %
  • Standby current: < 0.1 mA (typical)
  • Idle current: 0.58 A @ 14.4 V
  • Thermal cutoff threshold: 93 °C (± 5 %)

OUTPUT POWER RMS @ 14.4 V (1 % THD)

  • Output power RMS @ 4 Ω: 60 W x 4 or 150 W x 2 [BTL]
  • Output power RMS @ 2 Ω: 75 W x 4
  • T.H.D. @ 4 Ohm: < 0.2 % (1 kHZ / 90 Power rating ref)
  • T.H.D. @ 2 Ohm: < 0.6 % (1 kHZ / 90 Power rating ref)
  • Minimum load: 2 Ohm with musical signal

SIGNAL INPUT

  • Low level input sensitivity range: 0.3 ÷ 5 Vrms
  • High level input sensitivity range: 1.2 ÷ 20 Vrms
  • Bandwidth (- 3 dB ÷ 10 W): 5 Hz ÷ 31 kHz
  • Low level Input impedance: > 15 kOhm
  • High level input impedance: 21 Ohm (dummy load with jumper)
  • Ground reference (LL only): OPEN – 21 Ohm
  • S/N (AP filter 10 Hz – 22 kHz):

FEATURES

  • Onboard filter configuration: OFF – HP – LP
  • Onboard filter slope: 12 dB/Oct
  • Onboard filter frequency: 80 Hz
  • Autosense power-on (HL only): BTL source only
  • Start&Stop compliance: YES

CONNECTIONS

  • Low/High level input : Micro-Fit
  • Speaker out: Mini-Fit
  • Power supply: Mini-Fit

APPEARANCE

  • Dimensions: 109 x 65 x 34 mm
  • Weight: 320 g