Kirjeldus

GLADEN MOSCONI PICO 8|10 DSP V2 – 8-Channel PWM Amplifier with Integrated DSP

Overview MOSCONI Pico 8|10 DSP

With the PICO V2 8|10 DSP, MOSCONI launches the second generation of PICO DSP amplifiers for the car audio market. In addition to improved connectivity, the new PICO delivers enhanced sound performance and greater efficiency.

All connections are now located on one side, and under a magnetic housing cover, all relevant adjustment switches required for operation in modern vehicles are found. All inputs now support both high-level and low-level signals. All DSP settings can now be configured via a USB-C port.

Perfect OEM Integration:

A powerful DSP amplifier optimized for factory radio use. Eight analog inputs up to 30 V, flexible routing, 3 x input EQ and delay. With 4 x 50 W + 4 x 80 W, it is ideal for active and semi-active systems, as well as classic Front + Rear + Subwoofer applications. Two digital inputs (SP-DIF and BT+) and two processed line-outs ensure future-proof connectivity.

Transformerless High-Speed PWM Amplifiers:

Highly efficient PWM amplifiers with the world’s fastest carrier frequency (> 2 MHz) allow Hi-Res audio transmission and extremely compact design. Modulation occurs directly from the 96 kHz TDM signal of the DSP without a DAC, resulting in near-zero noise floor and THD + N ~ 0.02 % / 1 W.

Input Section:

• 8 x switchable analog inputs (High-Level / Low-Level), Class SB compatible, 2–30 V

• 1 x digital input SP-DIF optical (8 kHz – 96 kHz sampling rate)

• 1 x digital input coaxial (8 kHz – 96 kHz sampling rate)

• 1 x Bluetooth port with SP-DIF TTL (8 kHz – 96 kHz, e.g., for Mos_BTS Bluetooth streaming module)

• Bluetooth extended digital audio port (BT+) – flexible 8 kHz – 384 kHz synchronous digital input for 2–16 channels, direct DSP access without jitter (e.g., MOS BTS-LD4C BT streaming module or extended analog inputs)

DSP Section:

• 912 MHz, 32-bit audio processor, 64-bit core

• Double-precision 56-bit filter calculations

• Sample rate: 96 kHz

Control:

• 1 x Remote Connector (analog, for RTC.2 remote volume control)

• 1 x BT+ control port (MOS-BT3.0 app control, RC-CAN bus control, MOS_USB2.0 programming dongle, BTS-LD4C high-res streaming module, Gladiator controller)

• Pilot tone control capable

• 1 x Remote Out, 1 x Remote In, Auto-Remote at high-level connection

• MOLEX® speaker connectors

• Very compact design with low heat dissipation, ideal for installation behind panels

Software Features:

• 3 x 9-band parametric input EQ (de-equalizing), dynamic

• 6 x input delay 0–3 ms / 0.01 ms (de-delay)

• 10 x digital input level controls (signal conditioning)

• Flexible mixer for signal routing (channel-separated, can sum and subtract, 10 inputs to 4 x 2 output groups)

• 6 x 30-band or 4 x 30-band + 2 x 15-band group EQ (parametric, relative phase stable)

• 8 x 10-band output filters (High Pass / Low Pass / High Shelf / Low Shelf / Notch / Allpass 1st–4th order / Speaker EQ)

• 8(10) x speaker delay 0–12 ms, 0.01 ms

• 8 x speaker phase switch

• Flexible phase control with calculation tool

• Extensive integrated analysis tools

• B.A.R.N.I.E. compatible

Technical Data Mosconi Pico 8|10 DSP

Output Power / Output Section:

• 4 Ohms: 4 x 50 W (Channels 1–4), 3-ohm stable (not bridgeable)

• 4 Ohms: 4 x 80 W (Channels 5+6 / 9+10), 2-ohm stable / bridgeable

• 4 Ohms: 4 x 45 W + 2 x 210 W (bridged channels 5+6 / 9+10)

• Line Out: 2 x 2 Vrms (Channels 7+8)

Data:

• Input voltage: 2 Vrms (LL) – 15 Vrms (HL default) – 30 Vrms (HL max)

• Overall efficiency: > 80%

• Auto-On (high-level only): Off-BTL

• Dimensions: 150 x 160 x 46 mm

• Weight: 1150 g