Controller for Mosconi DSP Processors or DSP Amplifiers

Description

The Mosconi GA-Gladiator is a high-end control unit designed to seamlessly manage Mosconi DSP processors or DSP amplifiers. It allows precise adjustment of overall volume, subwoofer levels, and quick switching between stored presets.

Technical Specifications

• Compatible with Mosconi DSP processors and DSP amplifiers

• Adjustable RGB lighting

• Multiple mounting options

Features

• Adjust overall system volume and subwoofer level

• Switch quickly between presets stored in the processor

• Software-controlled customizable RGB lighting

The GA-Gladiator combines functionality with flexibility, ensuring it integrates smoothly into any vehicle interior while providing convenient, real-time control over your car audio system.

GLADEN MOSCONI AERO 8|12 DSP | Digital Signal Processor

The new generation of MOSCONI’s DSP flagship

It is a rare challenge to make “the best” even better. This was the case with the MOSCONI DSP 8to12 AEROSPACE, which for many years has been ranked among the best DSPs on the market and is still considered “state of the art” in the high-end segment today. With the new AERO 8|12 DSP, our engineers succeeded in raising decisive aspects of performance and sound quality to the next level.

The new AERO 8|12 DSP now comes equipped with a BT Plus Port and is therefore compatible with our latest innovation, the BARNIE measurement system. In addition, it now features a universal interface for up to 16 channels.

For improved sound performance, the unit uses an active overall-bias stabilization that minimizes distortion across the entire dynamic range. Channel separation—whether in mixed operation (high level/low level) or while summing inputs—has also been optimized with Smart-Dual-ADC technology.

For improved connectivity and installation, the AERO 8|12 DSP features a USB-C connection and a newly designed housing adapted for modern installations.

Technical Data – Mosconi AERO 8|12 DSP

Inputs:

• 8 x RCA (switchable high/low level with autosense)

• 4 freely selectable as prioritized auto-fade / AUX

• 1 x S/PDIF digital optical

• 1 x RCA digital coax

• 1 x BT slot

• ATOM Mixer Menu with dynamic preset switching and “trigger” control

Outputs:

• 12 x RCA analog

• 1 x S/PDIF optical (freely assignable, volume-controlled)

• 12V remote-out

Equalizer:

• Fully parametric 30-band EQ (also graphical), adjustable ±12 dB, Q factor: 0.5 – 40

• Fixed assignment: Channels Front (1–6), Rear (9 + 10)

• Assignable channels: 7 + 8 = Front/Rear, 11 + 12 = Sub/Center/Free

Filters:

• 10 freely configurable per channel (adjustable without sound interruption)

• High-pass, low-pass, shelf, notch, all-pass, peak EQ

• Slope: 6 – 120 dB/octave, variable Q, time, and level

Additional Features:

• Compatible with BARNIE measurement system

• Time alignment: 0 – 12 ms (0.005 ms steps, no sound interruption)

• Input delay (channels 1–6) for correction of OEM system delay

• Phase inversion: 0–180°

• Output level adjustment (0.5 dB steps)

• Mute function

• 4 x preset memory (switching without interruption)

Dimensions:

• 200 x 125 x 40 mm (including mounting flange)

8-Channel High-End Digital Sound Processor

Description

GLADEN DSP 6to8 PRO Digital Sound Processor

48 kHz / 24-Bit

Specifications:

Inputs:

• 6 x RCA (Cinch), switchable High/Low level with AutoSense

• 1 x BT interface (compatible only with BTM)

• 2 of them freely assignable as prioritized Auto-fade / Aux

• ATOM Mixer menu with dynamic preset switching and “Trigger” control

Outputs:

• 8 x RCA analog

• 12V Remote-Out / AutoSense with High-Level signal

Equalizer:

• Fully parametric 30-band EQ, also usable graphically, +12 to -12 dB, Q: 0.5 – 40

• Fixed channels: Front (1–4)

• Assignable channels: 5+6 = Front/Rear, 7+8 = Sub/Center/Free

Filters:

• 5 freely configurable per channel

• High-pass, Low-pass, Shelf, Notch, All-pass, Peak-EQ

• Slope: 6 – 120 dB/octave, variable Q, time, and level

Other Features:

• Time correction: 0 – 12 ms (0.020 ms steps)

• Input delay (channels 1–6) for compensating delayed factory systems

• Phase inversion: 0–180°

• Output level adjustment (0.5 dB steps)

• Mute function

• 4x preset memory (switching without audio interruption)

Dimensions: 15 x 12.5 x 4 cm (including mounting flange)

Compatible Accessories:

• RCD (controls volume, subwoofer level, balance, fader, preset, mute)

• RC-Mini (controls volume, subwoofer level, preset, mute)

• RTC-HUB: Adapter for analog controllers (RTC, MOS_Switch)

• MOS_BTM BT module for control like RCD (with free Android app)

Technical Specifications:

• INPUT MODE: Low Level (LL) / High Level (HL)

• INPUT IMPEDANCE: > 12KOhm (LL) / 47Ohm (HL)

• INPUT SENSITIVITY: 1.2Vrms ÷ 8Vrms (LL) / 3Vrms ÷ 20Vrms (HL)

• INPUT VOLTAGE REGULATION: -16.5dB ÷ 0dB

• MAX OUTPUT SIGNAL: 8Vrms

• OUTPUT IMPEDANCE: 600 Ohm

• THD DISTORTION: <0.003% @ 4Vrms

• FREQUENCY RESPONSE: 10Hz ÷ 63KHz (within -0.1dB)

• CHANNEL SEPARATION: >90dB (@ 1KHz)

• SUPPLY VOLTAGE: 11V ÷ 15V

• CURRENT CONSUMPTION: 0.9A @ 12V

• AUTOSENSE: OFF / BTL / SE

• REMOTE OUTPUT: 100mA max.

• COMMUNICATION PERIPHERALS: USB,RCD/RC-MINI (optional), MOS-BTM (optional)

• SIZE: 150 x 125 x 40 mm (including fixing feet)

Uncompromising in design, the 8 channel power amplifier MOSCONI PRO 8|30 DSP convinces with unconditional output power and an outstanding high-end sound experience. With the integrated 12 channel DSP (incl. 4 channel pre-out, processed, 8 V) almost all imaginable system configurations are possible. The power amplifier is High Level capable and Class SB compatible.

• Output power @ 4Ω: 4 x 90 Watt + 4 x 170 Watt
• Output power @ 2Ω: 4 x 115 Watt + 4 x 220 Watt

  • Bridged Output power @ 4Ω:

    2 x 230 Watt + 2 x 440 Watt

• Input sensitivity low level: 2 Vrms (LL)
• Input sensitivity High Level: 15 Vrms / 30 Vrms – (15 Vrms HL Class SB)
• Digital inputs: Optical (Toslink) / EXT CARD
• Analoge Eingänge: 8 x analog (Cinch) / optional EXT4HLIN per Adapter

   

• Remote controls: Mosconi RCD or RC mini
• Connection programming: Mikro USB
• Dimensions: 500 x 205 x 55 mm
• Weight: 5,2 kg

• Extremely powerful DSP in a compact form factor.

• Four analog inputs (High/Low-Level) and three digital inputs (SP-Dif, Bluetooth Streaming with MOS-BTS, BT+ with direct DSP access).

• Expandable to 8 analog inputs using MOS EXT4HL. Compatible with 12V and 24V onboard power systems.

• Six analog outputs. 64-bit platform with dISC functions (dynamic equalizer and phase control).

• All connections use industrial-standard Molex. Direct RTC connection for volume, sub-level, or input gain control.

Technical Details:

• Operating Voltage: 8V – 32V

• Input Voltage: 2 Vrms (Low-Level) / 12 Vrms (High-Level)

• Dimensions: 86 x 65 x 34 mm

• Weight: 180 grams

Designed to be as small as possible for a complete audio system, the Gladen Pico 8|12 offers impeccable control of input signals and includes a universal interface to connect with OEM head units. It boasts a 3×9 band parametric equaliser, the option to deal with any delays and differences in level (gain) on its inputs plus a flexible mixer for signal routing. The high-speed PWM stages process 96kHz/24-bit audio streams directly, with 12 channels of DSP feeding eight Class G/H amplifiers. As the first Mosconi Gladen device to work directly with the Gladen Aures in-car measuring system, it makes integration easier than ever. It provides automatic DSP setup and centre channel management, with mixing, straight summation or special algorithm matrix options all possible.