Gladen ATM

159.00

Kirjeldus

Gladen ATM – exchange round terminal with amplifier power

Amplifier module for use on the passive subwoofer, 200 WRMS @ 2/4 Ohm

Description Gladen ATM

The Gladen ATM module replaces any standard 78mm round terminal and thus supplies the subwoofer chassis with a full 200Wrms. The connection is made with a compact Molex Mini-Fit JR plug, with which the subwoofer can be separated easily and safely. With an adjustable low-pass filter, low and high level inputs (with remote detection), gain control and connection for an optional RTC.2, the equipment of the ATM module is complete. Highly efficient technology enables an installation depth of only 125mm in the housing (*)

* plus cable routing, depending on wall thickness.

Technical specifications 

Total length 144mm from the lower edge of the flange

200 WRMS at 2/4 ohms

Gladen ATM

159.00

Kirjeldus

Gladen ATM – exchange round terminal with amplifier power

Amplifier module for use on the passive subwoofer, 200 WRMS @ 2/4 Ohm

Description Gladen ATM

The Gladen ATM module replaces any standard 78mm round terminal and thus supplies the subwoofer chassis with a full 200Wrms. The connection is made with a compact Molex Mini-Fit JR plug, with which the subwoofer can be separated easily and safely. With an adjustable low-pass filter, low and high level inputs (with remote detection), gain control and connection for an optional RTC.2, the equipment of the ATM module is complete. Highly efficient technology enables an installation depth of only 125mm in the housing (*)

* plus cable routing, depending on wall thickness.

Technical specifications 

Total length 144mm from the lower edge of the flange

200 WRMS at 2/4 ohms

Gladen ATM

159.00

Kirjeldus

Gladen ATM – exchange round terminal with amplifier power

Amplifier module for use on the passive subwoofer, 200 WRMS @ 2/4 Ohm

Description Gladen ATM

The Gladen ATM module replaces any standard 78mm round terminal and thus supplies the subwoofer chassis with a full 200Wrms. The connection is made with a compact Molex Mini-Fit JR plug, with which the subwoofer can be separated easily and safely. With an adjustable low-pass filter, low and high level inputs (with remote detection), gain control and connection for an optional RTC.2, the equipment of the ATM module is complete. Highly efficient technology enables an installation depth of only 125mm in the housing (*)

* plus cable routing, depending on wall thickness.

Technical specifications 

Total length 144mm from the lower edge of the flange

200 WRMS at 2/4 ohms